Welcome to visit Acepack website
Service Hotline:
Horizontal packaging machine maintenance tips
来源/作者: Shanghai Acepack Intelligent Technology Co., LTD | 发布时间: 2024-06-07 | 192次浏览 | 分享到:
In the production process, the maintenance of horizontal packaging machinery should be in accordanc

In the production process, the maintenance of horizontal packaging machinery should be in accordance with the maintenance manual and maintenance procedures, in accordance with the prescribed period of strict implementation of maintenance work, reduce the wear rate of parts, extend the service life of the machinery. In order to reduce surface wear, generally there should be good lubrication. Because the horizontal packaging machine is affected by the working environment and lubricating oil impurities, it is easy to block the oil hole pipeline of the lubrication system or damage the oil supply device. Therefore, in order to ensure the normal work of the lubrication system, it is necessary to dredge the oil holes, pipelines and clean them at any time, and fill the oil cup with lubricating oil.


Maintenance is generally divided into: daily maintenance, regular maintenance, special maintenance. Routine maintenance to fastening, cleaning, lubrication, inspection as the center, after the horizontal packaging machine work should be carried out according to the design requirements of routine maintenance. Level 1 maintenance is carried out on a daily basis, lubricating, tightening and inspecting the relevant parts and cleaning. Secondary maintenance work focuses on adjustment and inspection. Check the transmission parts, steering wheel and other parts. Three-level maintenance is to detect, eliminate and adjust the hidden dangers of each component, so that the wear degree of each component is more balanced. In order to complete the necessary replacement, adjustment and troubleshooting, the parts that affect the performance of the packaging machine and the parts that have signs of failure should be diagnosed and inspected. Horizontal packaging machine equipment should be tested and repaired before the cooling system, burning system and starting system every summer and winter. Deactivation maintenance refers to the cleaning and anti-corrosion work in the horizontal packaging machine control equipment due to seasonal influences, holidays and other factors.